KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




Kia Sportage>> Brake system>> Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels

Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels

Estimation of degree of deterioration

 PERFORMANCE ORDER

    Original brake колодки are equipped by indicators of deterioration of frictional overlays. Liberated from under an overlay body the wire indicator starts to rub during braking about a disk surface, publishing high-frequency squeal, - immediately replace колодки.
    The visual estimation of degree of deterioration of frictional overlays колодок forward brake mechanisms can be made through special observation ports in back walls of supports (see an illustration), - the minimum admissible thickness makes 2.0 mm, - in case of need replace колодки. In case of need remove колодки and make more detailed studying of their condition, - measurement of a thickness of a frictional overlay is made from the basis of a metal substrate (see an illustration).

Replacement

For rubbing of components of brake mechanisms it is necessary to use special means, or methyl spirit, - at all do not apply solvents on an oil basis!

Колодки it is necessary to make in the complete set for brake mechanisms of both forward wheels.


 PERFORMANCE ORDER

    Hang out the car over the earth and remove forward wheels. Turn out pair of directing bolts and remove a support of the brake mechanism, - without disconnecting a flexible brake hose tie up a support to suspension bracket elements.
Reversing of directing bolts of the brake mechanism of a forward wheel.
The removed support follows, without disconnecting from it a flexible brake hose, to tie up to suspension bracket elements.

Will turn out alternatively enough only bottom directing bolt and to cast away a support upwards, having developed it concerning the top bolt.

    Take from анкерной скобы the brake mechanism old колодки.
    By means of a special clamp wring out the working piston of a support in the wheel cylinder.
    Fill in анкерную скобу new brake колодки, - track correctness of placing of a spring clamp. Lower a support on the regular place, screw directing bolt () and tighten them with demanded effort. Operating in a similar manner, replace колодки the second brake mechanism. Establish to the place of a wheel and lower the car on the earth.