KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections

Kia Sportage>> Brake system>> Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk

Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk

Removal and installation of components

At assemblage track observance of requirements of Specifications of the Head Brake system to efforts of a tightening of carving fixture.

Design of the brake mechanism of a forward wheel

1 — the Flexible brake hose
2 — the Bottom directing bolt
3 — the Fixing bolt
4 — the Gate of prorolling of the brake mechanism

5 — the Brake support (the wheel cylinder)
6 — Brake колодка
7 — Ankernaja скоба
8 — the Spring clamp


 PERFORMANCE ORDER

    Estimate degree of deterioration and the general condition of components. Defective details replace.

Disk check

 PERFORMANCE ORDER

    Measure a thickness of a disk, - gaugings should be made in several points on perimetre. Compare result of measurement to requirements of Specifications of the Head Brake system, in case of need make replacement.
    By means of a measuring instrument плунжерного type (DTI) define size of lateral palpation of a disk, - if the result of measurement exceeds limiting admissible value (0.1 mm), give a disk in проточку (within an admissible range of a thickness), or make its replacement.