KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Brake system>> Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels

Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels

 PERFORMANCE ORDER

  1. By means of special накидного a key with накидной a head release штуцерную a nut of fastening of a flexible hose to a metal line of a hydraulic path.
  1. By means of suitable nippers take a clamp and liberate a brake hose from a basic arm.
  1. Turn out a hollow bolt штуцерного a socket of fastening of a hose to a support of the brake mechanism and remove a hose.
  2. Installation is made upside-down, - sealing elements штуцерных sockets are subject to replacement without fail. Track observance of requirements of Specifications of the Head Brake system to efforts of a tightening of carving fixture. Make sure that the established hoses do not adjoin to elements of a suspension bracket and a steering drive at any position of forward wheels.