KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Brake system>> Removal and installation of a pedal of a foot brake

Removal and installation of a pedal of a foot brake

Operate as numbering of components.

Details of installation of a pedal of a foot brake

1 — the Clamp (is subject to replacement without fail)
2 — the Finger
3 — the Nut
4 — the Bolt
5 — the Returnable spring

6 — the Pedal
7 — the Remote plug
8 — Axial plugs
9 — the Rubber emphasis
10 — the Overlay колодки


 PERFORMANCE ORDER

  1. Estimate degree of deterioration of axial plugs and an overlay колодки, whether check up will drive the lever of a pedal and whether ослабла a returnable spring. Replace defective components.
  2. Installation is made in an order, the return to an order of dismantle of components, - axial and remote plugs before landing grease литиевой with greasing (NGLI № 2). Track observance of requirements of Specifications of the Head Brake system to efforts of a tightening of carving fixture.
  3. In summary do not forget to adjust a pedal (the Section of Check and adjustment of a pedal of a foot brake see).