KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Brake system>> Removal and installation of hydraulic and electronic blocks of management ABS/EBD

Removal and installation of hydraulic and electronic blocks of management ABS/EBD

Details of installation of electronic and hydraulic blocks of management ABS/EBD

1 — the Electronic block of management (ECU)
2 — Basic arm HECU
3 — the Fixing pin

4 — the pump Electromotor
5 — Electroconducting
6 — the Hydromodulator (HCU)


 PERFORMANCE ORDER

  1. Switch off ignition.
  2. Disconnect electroconducting from the electronic block of management (ECU).

Try not to admit casual giving of an onboard food (12) on any of plugs ECU!

  1. Carefully wipe a hydromodulator surface (HCU), completely having removed from it dirt and greasing traces.
  2. Preliminary having marked, disconnect from HCU hydraulic lines.
  3. Turn out bolts of fastening of a basic arm of the hydromodulator to a wing mudguard in an impellent compartment of the car.
  4. Remove the hydromodulator in gathering with a basic arm and the electronic block of management (ECU).
  1. Take a fixing pin, dismantle the landing plug and remove assemblage HECU from a basic arm.
  1. Turn out fixing bolts and remove from assemblage HECU the electronic block of management (ECU).
  2. Check up sealing elements ECU on presence задиров and cracks, - in case of need make replacement.
  3. Installation is made upside-down, - track correctness of connection of hydraulic lines (be guided on put in the course of dismantle, - to identification labels), and also behind observance of requirements of Specifications of the Head Brake system to efforts of a tightening of carving fixture.
  4. In summary pump over a hydraulic path of brake system (the Section Prorolling of brakes see) and make car trial runs.