На нашем портале о Лондонском клубе Челси вы в любое время будете в курсе всех новостей
Kia Sportage>> the Suspension bracket and a steering

Suspension bracket and steering

Specifications

Separate characteristics are resulted also in the text of the head and in case of compulsion of their performance are allocated by a bold type.

The general data

Wheel base, track, turn radius, mm Specifications to the Head Controls and operation receptions see
Bridges, the main transfers, приводные shaft/semiaxes Specifications to Head Transmissionnaja a line see

Forward suspension bracket

Design Independent, two-lever, with rack-mount assemblages on screw springs and the stabilizer of cross-section stability (the Scheme of the organisation of a forward suspension bracket see an illustration)

Back suspension bracket

Design Dependent with not cutting bridge, two bottom and one top longitudinal levers, the telescopic shock-absorbers separately established by screw springs and a jet bar (the Scheme of the organisation of a back suspension bracket see an illustration)

Steering

Design
  • Drive
Under the scheme "trapeze" (the Scheme of the organisation of a steering drive see an illustration) by means of the hydrostrengthened transfer of type «the screw - a ball nut»
  • Steering column
Regulated, safety, with a flexible joint
The transfer relation of the steering mechanism 15.2:1
Type and volume of liquid ГУР Specifications to the Head Current leaving and service see
Nominal length of a steering column (see an illustration), mm 766.5
External diameter of a steering wheel, mm 390
Full quantity of turns of a steering wheel 3.54
Size of a free wheeling of a steering wheel (see an illustration), mm 5 ÷ 30
Limiting admissible value of resistance to steering wheel rotation (see an illustration), Н 33
The pressure developed by the steering pump, кПа 6860 ± 98
Size of a deflection of a belt of a drive of the steering pump by pressing with effort 1 кГс, mm
  • New belt
6 ÷ 7
  • The belt which was in the use
8 ÷ 10
Effort страгивания сошки the steering mechanism, Nanometer 88

Suspension bracket geometry

Frame

See Control кузовные the sizes in the end of the Management.

Corners of installation of wheels

Corners of installation of wheels

Convergence, mm
  • Forward wheels
    • Without passengers
2.5 ± 2.5
    • With two passengers
0
  • Back wheels
0
Disorder
  • Forward wheels
    • Without passengers
0.44 ° ± 0.75°
    • With two passengers
0 ° ± 0.75°
  • Back wheels
Выбег (only forward wheels)
    • Without passengers
3.58 ° ± 0.75°
    • With two passengers
3.58 ° ± 0.5°
The maximum goal of a turn of a wheel
    • Internal wheel
37°
    • External wheel
33°

Efforts of a tightening of carving connections, Nanometer

Forward suspension bracket

Nuts of fastening of a bar of the stabilizer of cross-section stability to spherical bolts of tips of axial bolts of fastening of rack-mount assemblages 43 ÷ 54
Nuts/bolts of collars of fastening of racks to a stabilizer bar 21.5 ÷ 26.5
Bolts of fastening of racks of the stabilizer to a frame 37 ÷ 46
Nuts of piston rods of shock-absorbers 37 ÷ 46
Nuts of axial bolts of fastening of rack-mount plugs to the bottom levers of a suspension bracket 183 ÷ 211
Nuts of the top cups of screw springs 22 ÷ 27
Coupling bolts of rack-mount plugs 43 ÷ 54
Coupling bolts of the top spherical support 43 ÷ 54
Nuts шпиндельных bolts of fastening of the top levers of a suspension bracket 75 ÷ 93
Koronchatye nuts of the bottom spherical support 118 ÷ 157
Bolts of fastening of the bottom spherical support to cross-section levers 18 ÷ 27
Nuts шпиндельных bolts of fastening of the bottom levers of a suspension bracket 260 ÷ 299

Back suspension bracket

Nuts of the top support of shock-absorbers 55 ÷ 64
Nuts of bolts of the bottom support of shock-absorbers 75 ÷ 93
Nuts of axial bolts of fastening top and the bottom longitudinal levers 75 ÷ 93
Nuts of axial bolts of fastening of a diagonal jet bar of Panharda 75 ÷ 93

Steering

Nakidnye nuts штуцерных sockets of a transitive nozzle of connection of a manometre for pressure measurement in pressure head path ГУР 31 ÷ 47
Nakidnye nuts штуцерных sockets of pressure head lines ГУР 31 ÷ 47
Coupling bolt of a collar of the universal hinge of fastening of an intermediate steering shaft 18 ÷ 26
Fastening of the bottom basic arm of a steering column
  • Nut
19 ÷ 23
  • Bolt
16 ÷ 23
Bolts of the top basic collar of fastening of a steering column 16 ÷ 23
Nut of fastening of a steering wheel 39 ÷ 49
Counternuts of fastening of tips on bars of steering draughts 88 ÷ 118
Koronchatye nuts of spherical fingers of tips of steering draughts 42 ÷ 57
Bolts of fastening of assemblage of the pendular lever of a steering drive 206 ÷ 225
Bolts of fastening of the steering mechanism Data are absent
Fastening nut сошки to a shaft of the steering mechanism 206 ÷ 245
Lock adjusting nut of a sector shaft 39
Bolts of a cover of a sector shaft 34
Bolts of a cover of a worm shaft 34
Nut of fastening of connecting bent for to the pendular lever 42 ÷ 57
Nut of fastening of connecting bent for сошке the steering mechanism 42 ÷ 57
Shtutsernye nuts of fastening of lines ГУР to the steering mechanism 31 ÷ 47
Bolt of fastening of an intermediate steering shaft 30 ÷ 38
Bolts of fastening of a basic arm of the steering pump 37 ÷ 52
Nut of fastening of a pulley of a drive of the steering pump 61
Fastening of the tank of the steering pump 6.8 ÷ 9.8
Lock bolt натяжителя a belt of a drive of the steering pump 37 ÷ 52