KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




Kia Sportage>> Brake system>> Prorolling of brakes

Prorolling of brakes

Hit of a brake liquid on painted кузовные surfaces is interfaced to risk of damage of a paint and varnish covering, - casually got splashes should be deleted immediately dry rags or pure paper towels!


 PERFORMANCE ORDER

  1. Make sure that tank GTTS is filled a minimum on 3/4, - do not suppose lowering of level of a liquid below the given critical mark during all course of performance of prorolling. Will get support of the assistant.
  2. Hang out the car over the earth.
  3. Remove a protective cap from the gate of prorolling of a support / the wheel cylinder of the brake mechanism of the first of served wheels of the car. Plant on the gate a transparent hose of suitable diameter, - the second end of a hose lower in transparent capacity partially filled with a brake liquid.
Prorolling of a support of the brake mechanism of a forward wheel.
Prorolling of the wheel cylinder of the brake mechanism of a back wheel.
  1. Ask the assistant to squeeze out some times a pedal of a foot brake, then to fix it in the bottom position.
  2. Ослабьте the gate also let out a brake liquid from the wheel cylinder in capacity.
  3. Tighten the gate and ask the assistant to repeat procedure, - continue prorolling until from a support/cylinder the brake liquid will not start to be pushed out pure, free from air bubbles.

Do not forget to watch liquid level in tank GTTS (the prevention in the section beginning see)!

  1. In summary reliably tighten the gate, make sure of absence of signs of leaks and plant a protective cap. At once collect traces of the spilt liquid.
  2. Operating in a similar manner, pump over brake mechanisms of the remained wheels.
  3. In summary modify liquid level in tank GTTS (Current leaving and service see the Head).