KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
   The general information
   Coupling
   Distributing box
   Kardannye shaft
   Bridges
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections

Kia Sportage>> Transmissionnaja a line

Transmissionnaja line

Specifications

Separate characteristics are resulted also in the text of the head and in case of compulsion of their performance are allocated by a bold type.

The general data

Organisation principle трансмиссионной lines RKPP/FE (Specifications to Heads the Five-step manual box of a gear change and Automatic transmission), a connected full drive (Part Time 4WD), - a distributing box with a 2-step reducer (демультипликатором) and without interaxal differential, муфты a free wheeling of naves of forward wheels (vacuum see, or mechanical), two карданных a shaft, not cutting back bridge.

Coupling (models with Manual transmission)

Type Dry, one-disk
Drive of deenergizing of coupling Hydraulic, with the general with a brake path the tank
Type and volume of a hydraulic liquid Specifications to the Head Current leaving and service see
Greasing выжимного the bearing (see an illustration) Mori White TA No.2
Flywheel
    Limiting admissible size of cross-section palpation (see an illustration), mm
0.2
    Limiting admissible depth проточки, mm
0.5
Basket
    Type
With диафрагменной a spring
    Working effort of a press disk, кГс
530
Conducted disk
    External diameter, mm
225
    Internal diameter, mm
150
    Thickness of frictional overlays, mm
      Rating value
3.5
      Limiting admissible value
0.3
      Limiting admissible size of cross-section palpation (see an illustration), mm
0.7
      Limiting admissible size of radial palpation, mm
1.0
Coupling pedal (see an illustration)
    Type
The pendant
    Shoulder
6.9:1
    Full speed, mm
155
    Free wheeling, mm
      Adjusting value
12.7
      Admissible range
8 18
    Height (taking into account the panel of a carpet covering of a floor), mm
250
    Deenergizing height, mm
184
The main cylinder
    Internal diameter of the cylinder, mm
15.9
The executive cylinder
    Internal diameter of the cylinder, mm
19.1

Distributing box

Type With a two-level reducer (демультипликатором)
Type of a drive of a forward target shaft Chain transfer
Type and volume of a lubricant liquid Specifications to the Head Current leaving and service see
The transfer relation демультипликатора High/Low 1.000/1.981

Kardannye shaft

Geometrical parametres (the Design карданных shaft see an illustration)
    Length (L), mm
      Forward shaft
700
      Back shaft
        Models 5-dvernyj the Versatile person
1061
        Models the Cabriolet
775
External diameter, mm
    Forward shaft
50.8
    Back shaft
63.5
Limiting admissible size of a bend of a shaft (see an illustration), mm 0.4
The list of let out lock rings карданных hinges
    Detail number
Thickness, mm

1757 25 171

1.22

1757 25 172

1.24

1757 25 173

1.26

1757 25 174

1.28

1757 25 175

1.30

1757 25 176

1.32

1757 25 177

1.34

1757 25 178

1.36

1757 25 179

1.38

Bridges

Type  
    The forward bridge
Cutting, (SHRUS) power shafts and automatic ступичными муфтами a free wheeling with vacuum, or a mechanical drive is equipped гипоидной by the main transfer with not blocked differential, two equipped hinges of equal angular speeds
    The back bridge
Not cutting (rigid), it is equipped гипоидной by the main transfer with not blocked (a standard complete set), or self-blocked LSD-type (option) in differential and two semiaxes

The forward bridge

Type and volume of a lubricant liquid Specifications to the Head Current leaving and service see
Pretightness of wheel bearings, Nanometer 0.88 1.14
Limiting admissible size люфта wheel bearings (see an illustration), mm 0.1
Reducer of the main transfer
    Type
Gipoidnogo type with косозубыми gear wheels of direct gearing
    Designation
      Petrol models
        Models with Manual transmission
          WITH ABS
K08C
          Without ABS
K04W
        Models with АТ
          WITH ABS
K08A
          Without ABS
K04L
    Diesel models (RKPP/AT)
      WITH ABS
K04F
      Without ABS
K08I
Quantity of teeths of gear wheels
    Leading gear wheel (all models)
9
    Conducted gear wheel
      Petrol models
        Models with Manual transmission
37
        Models with АТ
43
      Diesel models (RKPP/AT)
40
    The transfer relation
      Petrol models
        WITH Manual transmission
4.625:1
        WITH АТ
4.778:1
      Diesel models (RKPP/AT)
4.444:1
Length of the remote plug of differential, mm 54.80 56.09

Limiting admissible люфт gearings of gear wheels of differential, - the mm is regulated by selection of persistent washers,
0 01
Identification marks and thickness of persistent washers of lateral gear wheels

Marks

Thickness, mm

0

2.00

5

2.05

1

2.10

15

2.15

2

2.20

Depth зачеканивания a fixing finger of an axis of satellites, mm
1

Fixing of a conducted gear wheel of the main transfer, the scheme of drawing and hermetic volume, sm3
0.04
The pretightness of a leading gear wheel of the main transfer, - is regulated by selection of persistent washers, Nanometer
    Stage 1 (without epiploon installation)
0.9 1.4
    Stage 2 (after epiploon installation)
1.6 2.1

Identification marks and thickness of persistent washers of a leading gear wheel of the main transfer

Marks

Thickness, mm

8

3.08

11

3.11

14

3.14

17

3.17

20

3.20

23

3.23

26

3.26

29

3.29

32

3.32

35

3.35

38

3.38

41

3.41

44

3.55

47

3.47

Size of lateral palpation of a connecting flange, mm
No more than 0.06

Size люфта gearings of gear wheels of the main transfer, mm

0.12 0.14

Quality check of contact of gearing
Gear wheels of the main transfer with the help
Lead minium

Distance between directing sections of covers of bearings, mm
185.425 185.500
Power shafts
    Type of hinges
      From outside differential
Hinges of double indemnification
      From outside wheels
Ball hinges of equal angular speeds (SHRUS)
    Length, mm
      The left shaft
596.2
      The right shaft
528.7
    Diameter, mm
27.1

The back bridge

Type and volume of a lubricant liquid Specifications to the Head Current leaving and service see
Reducer of the main transfer Specifications for the forward bridge see
Semiaxes
    Length, mm
      Left полуось
716.5
      Right полуось
762.5
    Limiting admissible size of a bend (see an illustration), mm
1.0

Efforts of a tightening of carving connections, Nanometer

Efforts of a tightening of separate elements of fixture can be resulted directly in the text of sections where they are allocated by a bold type.

Coupling

Counternut And an emphasis of a pedal of coupling (see an illustration) 14. 18
Nut of a pusher of the main cylinder 12 17
Nut of an axial bolt of a pedal of coupling 20 34
Nuts of fastening of the main cylinder 19 26
Shtutsernye nuts of fastening of hydraulic lines to the main cylinder 16 23
Bolts of fastening of the executive cylinder on картере Manual transmission 19 26
Shtutsernye nuts of fastening of hydraulic lines to the executive cylinder and a flexible hose 13 22
The gate of prorolling of the executive cylinder 5.8 7.5
Bolts of fastening of a flywheel (8 шт) 96 103
Bolts of fastening of a basket of coupling 18 26

Distributing box

The gauge-switch of activation of a mode 4WD 20
Stopper of a jellied/control aperture 30
Drain stopper 30
Bolts of fastening of a lateral support (2 шт) 23
Nuts of fastening of a lateral support (2 шт) 40
Bolts of fastening of the lever of switching of modes to a distributing box 30
Bolts/nuts of fastening of a clamping flange пыльника the lever of switching of modes 20
Fastening bolt муфты a speedometer drive 7

Nuts of fastening of connecting flanges of target shaft (see Replacement of epiploons of target shaft Has undressed) 111
Bolts of fastening of a distributing box to картеру RKPP/AT 44
Bolts of fastening of the central support to a cross-section beam 30
Bolts of fastening of a cross-section beam to a frame (8 шт) 44
Bolts of fastening of a plate of a cover of the main bearing (TORX, 5 шт) 16
Bolts of a cover of a chain drive 44
Заглушки switching rods in картере boxes 44
Bolts of fastening of a forward cover to картеру boxes 28
Bolts of fastening of a forward cover to a bearing cover 7

Kardannye shaft

Fastening bolts/nuts карданных shaft to connecting flanges of leading gear wheels of the main transfers of bridges 34.3 37.3
Fastening bolts/nuts карданных shaft to connecting flanges of days off валова a distributing box 49 59

Bridges

The forward bridge

Drain stopper картера a reducer 39 54
Jellied/control stopper картера a reducer 30
Bolts of fastening of a nave
    Stage 1
25
    Stage 2
31
Stupichnaja nut 118 157
Bolts of fastening of a brake board 16 23
Stupichnye bolts 147
Bolts of fastening of a casing of the bearing to a sleeve картера the bridge 36 54
Bolts of fastening of a conducted gear wheel to a differential box 69 83
Bolts of fastening of covers of bearing bearings of a box of differential in картере a reducer
37 52
Bolts of fastening of assemblage of differential To картеру the bridge
    М8
23 26
    М10
36 34
Nut of fastening of a connecting flange of a leading gear wheel of the main transfer 128 284
Bolts of fastening of a lock plate 18 26

The back bridge

Drain stopper картера a reducer 39 54
Jellied/control stopper картера a reducer 30
Bolts of fastening of the holder of an epiploon of a semiaxis to a sleeve картера the bridge 88 108
Nut of fastening of a connecting flange of a leading gear wheel of the main transfer 128 284
Bolts of fastening of a conducted gear wheel to a differential box 69 83

Bolts of fastening of assemblage of the forward bridge
    AND
49 80
    IN
69 103

Bolts of fastening of covers of bearing bearings of a box of differential in картере a reducer (the data on the forward bridge see) 37 52
Bolts of fastening of a lock plate 18 26
Bolt of fastening of gauge ABS to картеру a reducer 7.8 11.7
Bolts of fastening of assemblage of differential to картеру the bridge
М8 23 26
М10 49 54