KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




Kia Sportage>> Brake system>> Removal and installation of the lever of a lay brake, adjustment приводного a cable

Removal and installation of the lever of a lay brake, adjustment приводного a cable

Removal and installation

At removal operate as numbering of components.

Details of installation of the lever of a drive of a lay brake

1 — the Cover of lever assemblage
2 — the Adjusting nut
3 — an electroconducting Socket
4 — the Bolt

5 — the Gauge-switch of activation of a control lamp
6 — the Lever of a drive of a lay brake
7 — the Handle
8 — the Button отпускания blocking
9 — the Spring


 PERFORMANCE ORDER

  1. Attentively study a condition of the removed components, defective details replace.
  2. Installation is made upside-down, - in summary do not forget to adjust a drive of a lay brake.

Adjustment

 PERFORMANCE ORDER

  1. Pull the lever upwards with effort 10 кГс, - the lever course should make 6 8 clicks of a ratchet, - in case of need make corresponding updating.
  2. Start the engine and make some braking at movement of the car by a backing.
  3. Muffle the engine.
  4. Turn out the screw of fastening of a cover of a drive of a lay brake.
  5. Remove a clamp and execute demanded updating by rotation of an adjusting nut in a forward part приводного a cable.
  6. Having finished adjustment, include ignition and cock the lever of a lay brake on one click of a ratchet, - make sure of serviceability of operation of a control lamp of brake system in a combination of devices. Release the lever and check up freedom of rotation of back wheels. Do not forget to establish into place a clamp of an adjusting nut.