KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
   The general information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check differential перепускного the pressure valve-regulator (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assemblage of the vacuum amplifier of brakes
   Estimation of degree of deterioration, replacement колодок disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, estimation of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of a lay brake, adjustment приводного a cable
   Prorolling of brakes
   Reading of codes of malfunctions ABS/EBD, clearing of memory of the processor
   Removal and installation of hydraulic and electronic blocks of management ABS/EBD
   Removal, check installation of wheel gauges ABS
   Replacement of rotors of gauges ABS of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections

Kia Sportage>> Brake system>> Removal and installation of assemblage of the vacuum amplifier of brakes

Removal and installation of assemblage of the vacuum amplifier of brakes

At removal operate as numbering of components.

Order of dismantle of assemblage of the vacuum amplifier of brakes

1 — Sockets of electroconducting of the gauge-switch of level of a brake liquid and the differential gauge-switch
2 — the Vacuum hose
3 — Brake lines
4 — the Bolt
5 — the Valve-regulator
6, 9 — Nuts

7 — the Basic arm of the valve-regulator
8 — ГТЦ
10 — the Clamp
11 — the Finger
12 — the Vacuum amplifier
13 — the Sealing lining


 PERFORMANCE ORDER

    Remove ГТЦ (see Has undressed Removal, service and installation of the main brake cylinder). Disconnect from assemblage of the brake amplifier a vacuum hose.
    In car salon remove a clamp and take a finger of fastening of a rod of a pusher to a brake pedal.
    From the back party of a partition of an impellent compartment release four fixing nuts and remove assemblage of the vacuum amplifier with pusher ГТЦ.
    Installation is made upside-down, - track observance of requirements of Specifications of the Head Brake system to efforts of a tightening of carving fixture. Do not forget to adjust length of a rod of a pusher (see Has undressed Removal, service and installation of the main brake cylinder) and to pump over a hydraulic path (the Section Prorolling of brakes see)