Replacement трансмиссионного oils should be made in strict conformity with the Schedule of routine maintenance of the car (see Has undressed the routine maintenance Schedule).
Prepare a stock fresh трансмиссионного oils of a demanded grade, drain capacity of suitable volume, a wrench of the corresponding size and a stock of pure rags / old newspapers.
Oil should merge, being is preliminary heated-up during a short trip to normal working temperature, - hot oil possesses higher fluidity and is better washes away шлам and other adjournment. Having warmed up a transmission, tyre out the car on a platform/hang out strictly horizontally on the lift.
Turn out a jellied/control stopper картера Manual transmission (the Section Check of level of working liquids see).
Turn out located in the bottom part картера boxes a drain stopper and lower oil in the prepared capacity.
After вытекание oils will stop, wipe a drain stopper, screw it on the regular place and tighten with demanded effort (30 Nanometers), - do not forget to replace a sealing washer.
Refuelling fresh трансмиссионного oils is made through a control/jellied aperture (the Section Check of level of working liquids see).
|
|
Each manufacturer at oil manufacturing uses own base basis and additives, - do not mix some oil of different manufacturers! |
Make on the car a short trip after which examine drain and jellied/control stoppers картера Manual transmission on presence of signs of development of leaks.
|
|