KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of level of working liquids
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   Replacement трансмиссионного oils Manual transmission
   Replacement of greasings of a distributing box and differentials
   Greasing of locks and loops
   Condition check пыльников power shafts
   Greasing of universal hinges карданных shaft
   Check of components of brake system
   Check of functioning of system of cooling and frost resistance of a cooling liquid, liquid replacement
   Replacement of a filtering element of an air cleaner
   Replacement of spark plugs
   Replacement of candles накаливания
   Check of a condition and effort of a tension of belts of a drive of auxiliary units
   Check of a condition and reliability of fastening of components of the chassis, suspension bracket and steering drive
   Check of a condition of components of system of release of the fulfilled gases
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Power supply system check, replacement of the fuel filter
   Check of turns of idling
   Replacement ATF
   Check of serviceability of functioning of valve PCV (petrol models)
   Check of condition ВВ of electroconducting (petrol models)
   Check of a condition and replacement of a belt of drive ГРМ
   Check of a central air of air
   Check of a condition and replacement of brushes of screen wipers
   Check of a condition of the battery, care it and gymnastics
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




Kia Sportage>> Current leaving and service>> Replacement of impellent oil and the oil filter

Replacement of impellent oil and the oil filter

Long contact of a skin to the fulfilled impellent oil is dangerous enough. Use a protective cream or put on rubber gloves during carrying out described below procedures.

Frequent replacement of impellent oil is the main preventive procedure of service accessible to the mechanic-fan. Eventually oil is subject разжижению and to pollution that conducts to premature deterioration of the engine.


 PERFORMANCE ORDER

  1. Warm up the engine to normal working temperature.
  2. Поддомкратьте the car also establish it on props, or tyre out on a viewing hole/platform.
  3. Get under a drain aperture of the pallet картера capacity in volume of an order of 10 l for gathering of the fulfilled oil.
  1. Having put on protective rubber gloves, turn out a drain stopper and lower impellent oil in the prepared capacity, correcting position of last in process of weakening of a pressure of a stream.
  1. Check up a condition of the fulfilled oil, - if at it there is metal sawdust, it specifies in presence задиров, for example, in bearings of a cranked shaft. For the purpose of an exception of complications after performance of regenerative repair of the engine it is necessary to clean carefully all маслотоки greasing systems.

  1. By means of a special stripper dismantle the oil filter and its sealing ring which can remain stuck to a landing surface картера.
  1. Wipe a surface interfaced to the filter картера the engine pure rags.
  2. Slightly grease with pure oil the NEW sealing ring and plant it on the new filter.
  1. On petrol models screw oil in a reception aperture of the engine so that the sealing ring has nestled on an interfaced surface of the block, then hold on it for 420 (1 and 1/6 of turn). On diesel models tighten the filter against the stop a hand, then hold on its coupling key on 2/3 turns, the effort of a tightening of the filter should make an order 19.6 24.5 Nanometers.
  1. Having replaced a sealing washer, screw a drain stopper and tighten it with demanded effort (30 35 Nanometers).
  2. Fill in the engine fresh oil of a demanded grade (the Section Check of level of working liquids see).
  3. Wait for an order of 5 minutes, then check up level of oil and, in case of need, make corresponding updating.
  4. Having made a short trial trip, make sure of absence of signs of development of leaks of oil through a drain stopper of the pallet and a place of a joint of the filter with картером. In case of need tighten leaky planted element, then once again check up level of oil and if it is required, make corresponding updating.