KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
   The general information
   Coupling
      The general data
      Check and updating of level of a hydraulic liquid
      Check and adjustment of a pedal of coupling
      Removal and installation of a pedal of coupling
      Removal, service and installation of the main cylinder of a drive of deenergizing of coupling
      Removal, service and installation of the executive cylinder of a drive of deenergizing of coupling
      Removal, check of a condition and installation of components of coupling
   Distributing box
   Kardannye shaft
   Bridges
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Transmissionnaja line>> Coupling>> Check and adjustment of a pedal of coupling

Check and adjustment of a pedal of coupling

Height of position of a pedal

Check

 PERFORMANCE ORDER

  1. Unbend the panel of a carpet covering of a floor in a driver's foot well and measure position height колодки pedal assemblage concerning a salon floor. Compare results of measurement to requirements of Specifications of Head Transmissionnaja a line, in case of need make corresponding updating.
And — the Persistent bolt
In — the Counternut
With — the Counternut
D — the Pusher

Adjustment

Adjustment of height of position of a pedal of coupling is made by means of a persistent bolt (), - preliminary release a counternut (). The effort of a tightening of a counternut makes 14 18 Nanometers.

Pedal free wheeling

Check

 PERFORMANCE ORDER

  1. Slightly having pressed a pedal a hand, measure size of its free wheeling. If the result of measurement falls outside the limits an admissible range (8 18 mm), make corresponding updating.

Adjustment

 PERFORMANCE ORDER

  1. Release a counternut () and make corresponding updating by rotation of a rod of a pusher (D) the piston of the main cylinder of coupling.
  2. Check up height of position of the released pedal, in case of need make corresponding updating.
  3. Do not forget to tighten in summary a counternut ().

The height of deenergizing of coupling should make 184 mm.