KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
   The general information
   Coupling
      The general data
      Check and updating of level of a hydraulic liquid
      Check and adjustment of a pedal of coupling
      Removal and installation of a pedal of coupling
      Removal, service and installation of the main cylinder of a drive of deenergizing of coupling
      Removal, service and installation of the executive cylinder of a drive of deenergizing of coupling
      Removal, check of a condition and installation of components of coupling
   Distributing box
   Kardannye shaft
   Bridges
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




best canadian mail order pharmacies Kia Sportage>> Transmissionnaja line>> Coupling>> Removal, service and installation of the main cylinder of a drive of deenergizing of coupling

Removal, service and installation of the main cylinder of a drive of deenergizing of coupling

Hit of a brake liquid on painted кузовные surfaces is interfaced to risk of damage of a paint and varnish covering, - casually got splashes should be deleted immediately dry rags or pure paper towels!

Removal

Details of installation of the main cylinder of a drive of deenergizing of coupling

1 — the Line of a hydraulic path
2 — the Hose from tank GTTS

3 — the Nut
4 — the Main cylinder
5 — the Sealing lining


 PERFORMANCE ORDER

  1. Pump out a hydraulic liquid from tank GTTS (alternatively the tank can be muffled a way подкладывания under a cover of a polyethylene film). By means of special накидного a key with a cutting head disconnect from the main cylinder a tube of a hydraulic path of a drive of deenergizing of coupling.
  1. Release fixing nuts (one of the impellent compartment, the second of salon) and remove the main cylinder from a partition of an impellent compartment.

Service

 PERFORMANCE ORDER

  1. In case of need wring out downwards the piston, take a lock ring

Also disassemble the cylinder on components, operating as their numbering,

1 — the Clamp (a lock ring)
2 — the Persistent washer of the piston
3 — Assemblage of the piston with a secondary cup
4 — the Primary cup
5 — the Returnable spring
6 — the Hose to the tank
7 — the Landing plug
8 — the Case of the main cylinder
- For extraction of internal components submit to the cylinder the compressed air.

At removal of a lock ring try not to damage a surface of the piston contacting to a pusher.

  1. Spread out the removed components on a pure surface and wash out their brake liquid.
  2. Estimate degree of deterioration of the piston, primary and secondary cups and a cylinder mirror, whether check up ослабла a returnable spring. Defective components replace.
  3. Assemblage is made upside-down, before refuelling in the cylinder it is necessary to grease edges of the piston and cups with a pure brake liquid.
  4. The collected cylinder fill with a fresh brake liquid, then empty it, having wrung out the piston a screw-driver, - the liquid should merge through an exhaust outlet.

Installation

 PERFORMANCE ORDER

  1. Installation is made in an order, the return to an order of dismantle of components, - do not forget to replace a sealing lining, track observance of requirements of Specifications of Head Transmissionnaja a line to efforts of a tightening of carving fixture.

For a tightening штуцерной nuts take advantage накидным of a key with a cutting head.