KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
   The general information
   System of cooling of the engine
      Cooling liquid - the general data
      Replacement of a cooling liquid - broad-brush observations
      Tightness check, replacement of hoses of system of cooling
      Thermostat check
      Check of serviceability of functioning муфты couplings of the fan of system of cooling
      Washing of a path of system of cooling
      Removal and thermostat installation
      Removal, check of a condition and installation of a radiator of system of cooling, replacement радиаторных hoses
      Removal and installation of a broad tank
      Removal and installation перепускного a branch pipe охладительного a path of the petrol engine
      Replacement of the bearing of a drive of the fan of system of cooling
      Removal, installation and service of the water pump
   Systems of ventilation, heating and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections




гидрораспределители каталог.
Kia Sportage>> Systems of cooling, heating, ventilation and air conditioning>> System of cooling of the engine>> Removal, check of a condition and installation of a radiator of system of cooling, replacement радиаторных hoses

Removal, check of a condition and installation of a radiator of system of cooling, replacement радиаторных hoses

Petrol models

 PERFORMANCE ORDER

  1. Remove protection картера.
  1. Uncover a radiator, open the drain gate (1) and lower cooling liquid in the prepared drain capacity of suitable volume.
  1. Release fixing collars and remove top (1) and bottom (2) радиаторные hoses.
  1. Disconnect from a radiator going to a broad tank переливной a hose.
  1. Turn out fixing bolts and remove an air inlet of an inlet air path (1) engines.
  1. Turn out five bolts of fastening of a casing (1) вентиляторной assemblages.
  1. Turn out bolts of basic arms and, having submitted upwards, take a radiator from an impellent compartment.
  1. Examine the radiator heat exchanger on presence of signs of development of leaks, deformations ламелей both connecting branch pipes, and other mechanical damages. In case of need replace a radiator, or deliver it in a specialised workshop for performance of corresponding regenerative repair.
  1. Attentively study a condition радиаторных hoses, in case of need prepare replacement.
  2. Installation is made upside-down, - track reliability of fixing радиаторных hoses fixing collars and behind observance of requirements of Specifications of the Head of System of cooling, heating, ventilation and an air conditioning to efforts of a tightening of carving fixture.
  3. In summary fill system of cooling with a fresh mix (Current leaving and service see the Head), start the engine, warm it to normal working temperature, then, - if it is required, - modify heat-carrier level.
  4. Establish into place a cover of a radiator and, without suppressing the engine, check up corresponding components охладительного a path on presence of signs of development of leaks.

Diesel models

Details of installation of a radiator on diesel models

1 — the Broad tank with переливным a hose
2 — Top радиаторный a hose
3 — the Casing вентиляторной assemblages

4 — Bottom радиаторный a hose
5 — the Socket of the gauge of level of a cooling liquid
6 — the Radiator


 PERFORMANCE ORDER

  1. Empty cooling system (Current leaving and service see the Head).
  2. The general principle of performance of procedure is similar described above for petrol models. Dismantle components, operating as their numbering.