KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
   The general information
   Estimation of a condition of components of a suspension bracket and steering drive
   Forward suspension bracket
   Back suspension bracket
   Steering
      The general information
      Removal of air from a working path of system of hydrostrengthening of a wheel
      Check of a pressure of the steering pump
      Removal, check and installation of a steering wheel and steering column
      Removal and installation of tips of steering draughts
      Removal and installation of components of a steering drive
      Removal and installation of the steering pump
   Suspension bracket geometry
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Suspension bracket and steering>> Steering>> Check of a pressure of the steering pump

Check of a pressure of the steering pump

Do not keep a steering wheel at the working engine in extreme positions within more than 15 seconds!


 PERFORMANCE ORDER

  1. Disconnect a pressure head line of a hydraulic path from картера the steering mechanism and connect to it a measuring set, - the gate from a set should be connected on the party of the steering mechanism. Shtutsernye connections should be tightened with effort 31 47 Nanometers.
1 — To the pump
2 — To the steering mechanism
3 — the Thermometer (50 60 С)
4 — the Manometer
5 — Zapornyj the gate
  1. Execute procedure of "prorolling" of a hydraulic path (see Has undressed Removal of air from a working path of system of hydrostrengthening of a wheel).
  2. Completely open the gate the gate connected to system, then start the engine and some times turn a steering wheel from an emphasis against the stop for the purpose of warming up of a hydraulic liquid to normal working temperature (50 60 С).
  3. Lift turns of the engine to value 1000 1500 in a minute, close the gate and consider the manometre indication, - demanded value makes 6860 98 кПа (70 1 кГс/см2).
  4. Close the gate and at working with turns 1000 1500 mines-1 the engine turn a steering wheel from an emphasis against the stop, - the manometre indication should remain former.

In order to avoid an overheat of a hydraulic liquid do not keep the gate closed more than within 15 seconds!

  1. Muffle the engine, disconnect a manometre and the gate and restore initial connection of hydraulic lines, having tightened штуцерные sockets with demanded effort (31 47 Nanometers).
  2. In summary "pump over" a hydraulic path (see Has undressed Removal of air from a working path of system of hydrostrengthening of a wheel).