KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
   The general information
   Estimation of a condition of components of a suspension bracket and steering drive
   Forward suspension bracket
      The general data
      Removal and installation of components of assemblage of the forward bridge
      Removal, check of a condition of components and installation of the stabilizer of cross-section stability
      Removal, service and installation of rack-mount assemblages
      Removal, service and installation of the top levers of a suspension bracket
      Removal, service and installation of the bottom levers of a suspension bracket
   Back suspension bracket
   Steering
   Suspension bracket geometry
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Suspension bracket and steering>> Forward suspension bracket>> Removal, check of a condition of components and installation of the stabilizer of cross-section stability

Removal, check of a condition of components and installation of the stabilizer of cross-section stability

Removal

Details of installation of the stabilizer of cross-section stability are shown on an illustration of the Detail of installation of the stabilizer of cross-section stability of a forward suspension bracket.

 PERFORMANCE ORDER

  1. Hang out the car over the earth.
  2. Remove forward wheels.
  3. Remove protection elements картера.
  4. Turn out bolts of fastening of racks of the stabilizer to a frame.
1 — the Bolt of fastening of a rack to a frame
2 — the Collar of fastening of a rack to a stabilizer bar
3 — a stabilizer Bar
  1. Give nuts of fastening of a bar of the stabilizer to spherical fingers of tips of axial bolts of plugs of racks on the bottom levers of a suspension bracket.
1 — a stabilizer Bar
2 — Sharovyj the hinge of fastening of the stabilizer to the lever of a forward suspension bracket
  1. Turn out fixing bolts and remove from a bar of a rack and collars of their fastening.
1 — the Collar
2 — the Rack

Check

 PERFORMANCE ORDER

  1. Clear components of the stabilizer of a dirt and check up metal details on presence of cracks, deformations and other mechanical damages. Estimate a condition of rubber plugs of racks of the stabilizer.

Installation

 PERFORMANCE ORDER

  1. Get the top ends of racks (1) stabilizers in the basic arms on a frame and freely tighten fixing bolts.
  1. Hook on collars (2) for the bases of racks (1).
  1. Preliminary having moistened in a soap solution, plant on a stabilizer bar rubber plugs and place in their correct image concerning the put yellow or white paint of landing labels.
  1. Get a bar in collars and on pair coils of a carving screw хомутные bolts.
  2. Plant the bar ends on spherical fingers of tips of axial bolts of racks and, keeping heads, tighten fixing nuts with demanded effort (43 45 Nanometers).
  3. Tighten with demanded effort хомутные bolts of racks (21.5 26.5 Nanometers), then bolts of fastening of racks to a frame (37 46 Nanometers).
  4. Establish protection картера, wheels and lower the car on the earth. Do not forget to tighten wheel bolts.