KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Assembly blocks of safety locks/relays - the general information, removal, installation, replacement of safety locks
   System of timers and alarm gongs (ETWIS) - the general information, removal and installation of the operating module
   Check of serviceability of functioning of the switch of ignition
   Check of serviceability of functioning подрулевых switches
   Check of serviceability of functioning of operating switches and drive electromotors стеклоподъемников
   Check of serviceability of functioning of the operating switch and electromotors of adjustment of door rear-view mirrors
   Salonnye fixtures - replacement of lamps, check of serviceability of functioning
   Replacement of lamps and check of serviceability of functioning of external lighting devices
   Removal, check of serviceability of functioning and installation of the breaker of indexes of turns/alarm systems
   Removal, installation and adjustment of block headlights
   Safety pillows - the general information and safety measures
   Switching-off SRS
   Reading of codes of malfunction DTC
   Removal and installation of the module of a driver's pillow of safety
   Removal, installation and adjustment of a contact cable drum of the module of a driver's pillow of safety
   Removal and installation of the diagnostic module of pillows of safety (ADU)
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Onboard electric equipment>> Assembly blocks of safety locks/relays - the general information, removal, installation, replacement of safety locks

Assembly blocks of safety locks/relays - the general information, removal, installation, replacement of safety locks

The general information

All onboard electroconducting used on considered models can be broken into 13 basic plaits conditionally:

  1. Burn down electroconductings передка
  2. Burn down electroconductings of a combination of devices
  3. Burn down electroconductings of the panel of devices
  4. Burn down electroconductings of fuel injectors/atomizers
  5. Burn down engine electroconductings
  6. Burn down salon electroconductings
  7. Burn down back electroconductings
  8. Burn down electroconductings of a back bumper
  9. Burn down electroconductings of the left forward door
  10. Burn down electroconductings of the right forward door
  11. Burn down electroconductings of the left back door
  12. Burn down electroconductings of the right back door
  13. Burn down electroconductings of a door of a back

For protection of onboard consumers of the electric power the safety locks placed in two assembly blocks, one of which - main are used - is located in the right part of the impellent compartment, the second is built in in the panel of devices to the left of a steering column and equipped by a folding cover.

Replacement of safety locks

Schemes of an arrangement of safety locks in assembly are resulted in Specifications of the Head the Onboard electric equipment in the beginning of the present chapter. The label with the scheme of an arrangement of internal components is usually pasted also on a demountable cover of the main assembly block.

 PERFORMANCE ORDER

  1. For replacement of the failed safety lock which is located in салонном the assembly block, open the plastic cover equipped with loops with an inscription «FUSE» in the basis of a forward rack at the left under the panel of devices, then by means of the clip fixed in the block take a defective safety lock, - and establish on its place replaceable, calculated on the same current strength.
  1. Replacement of safety locks of the main assembly block is made in a similar manner, - try not to drop a demountable cover in an impellent compartment.

Removal and installation of the main assembly block

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  1. Release a fixing nut.
  1. Preliminary having marked, disconnect electroconducting and take the assembly block from an impellent compartment.
  2. Installation is made upside-down.