KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
   The general information
   The external equipment and кузовные elements
      Removal, installation and adjustment of components of devices of clearing and windscreen washing
      Removal, installation and adjustment of components of devices of clearing and washing of back glass
      Removal and lattice installation обтекателя
      Removal and installation and cowl adjustment
      Removal and installation of bumpers
      Removal and installation of door rear-view mirrors
      Removal and installation of a folding arm of fastening of a spare wheel
      Osteklenie bodies - the general information
      Dismantling, removal, installation and adjustment of doors
      Design of a drive door стеклоподъемников
      Design of a drive of door-locks
   The salon equipment
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Body>> The external equipment and кузовные elements>> Removal and installation of bumpers

Removal and installation of bumpers

Forward bumper

Details of installation of a forward bumper

1 — a radiator Lattice
2 — Lateral basic arms
3 — the Facing panel
4 — the Polymeric absorber of shock loadings

5 — the Amplifier
6 — the Basic arm
7 — the Shock arm
8 — the Insulator
9 — the Frame


 PERFORMANCE ORDER

  1. Remove from a bumper грязеотбойник.
  2. Turn out two (left and right) the top lateral bolt of fastening of a bumper.
FRT — Forward
  1. Remove lateral basic arms of fastening of a bumper.
  1. Give four adjusting waste nuts.
  1. Cautiously remove a bumper from the car, - it will be reasonable to take advantage of the help of the assistant.
  2. Release sixteen clamps of fastening of the facing panel and the bumper amplifier. Divide a bumper into three sections (facing, polymeric демпфер and the amplifier).
  3. Visually estimate a condition of the facing panel and polymeric демпфера absorption of shock loadings. Defective components replace.
  4. Installation is made upside-down, track observance of requirements of Specifications of the Head the Body to efforts of a tightening of carving fixture.

Back bumper

Details of installation of a back bumper (1 from 2)

1 — Lateral basic arms
2 — the Facing panel
3 — the Polymeric absorber of shock loadings

4 — the Amplifier
5 — Overlays
6 — Lanterns of illumination of licence plate
7 — the Basic arm


Details of installation of a back bumper (2 from 2).

 PERFORMANCE ORDER

  1. Turn out two fixing bolts and remove from a bumper грязеотбойник.
  2. Give four (on two from each party) adjusting waste nuts from below under a bumper.
  3. Disconnect electroconducting of fires of illumination of licence plate and backing fires.
  4. Remove a bumper.
  5. Release seventeen clamps of fastening of the facing panel and the bumper amplifier. Divide a bumper into three sections (facing, polymeric демпфер and the amplifier).
  6. Visually estimate a condition of the facing panel and polymeric демпфера absorption of shock loadings. Defective components replace.
  7. Installation is made upside-down, track observance of requirements of Specifications of the Head the Body to efforts of a tightening of carving fixture.