KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
Five-step manual box of a gear change
Automatic transmission
   The general information
   Search of malfunctions - the general information
   Reading of codes DTC, clearing of memory of the processor
   Checks and adjustments of components of control system АТ
   Checks and adjustments of a mehaniko-hydraulic part
   Check and adjustment приводного cable АТ
   Removal and installation of the lever of selector AT
   Removal and installation АТ
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections



Kia Sportage>> Automatic transmission>> Checks and adjustments of components of control system АТ

Checks and adjustments of components of control system АТ

The general information

Control system АТ can be broken into three subgroups conditionally: the Components providing TCM with the entrance information (including ECM); Actually the management module (TCM) and Actuation mechanisms.

Function chart of control system АТ

Identification card of plugs of socket ТСМ for petrol models

Checks

TCM

Include ignition, - the engine do not start.

Uncover contact socket TCM (the driver's party) and check up correctness of distribution of pressure on its plugs, - measurement is made between the corresponding plug and weight In case of need replace the management module.

Card of distribution of pressure on plugs of socket TCM (petrol models)

The plug

Appointment

Check conditions

Nome. Value, In

1 Mode "L" Ignition is included (ON), the lever = "L" В+
Ignition is included (ON), the lever ≠ "L" 0
2 Mode "R" Ignition is included (ON), the lever = "R" В+

Ignition is included (ON), the lever ≠ "R"

0
3 Switch POWER/ECONO POWER выкл В+
POWER вкл 0
4 The gauge-switch of stoplights The pedal of a foot brake is squeezed out В+
The pedal of a foot brake is released 0
5 The gauge of turns вх. A shaft/turbine Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
6 The gauge-switch 4WD LOW 4WD LOW выкл В+
4WD LOW вкл 0
7 Э/м the valve-switch And Ignition is switched off (OFF) 0
Ignition is included (ON) В+
8 Э/м the valve-switch In Ignition is switched off (OFF) 0
Ignition is included (ON) В+
9 Mode "2" Ignition is included (ON), the lever = "2" В+
Ignition is included (ON), the lever ≠ "2" 0
10 Mode "Р" Ignition is included (ON), the lever = "Р" В+
Ignition is included (ON), the lever ≠ "Р" 0
11 Alarm indicator POWER POWER вкл 0
POWER выкл В+
12 The switch of mode HOLD HOLD вкл 0
HOLD выкл В+
13 Entrance data Ignition is switched off (OFF) 0
Ignition is included (ON) В+
14 Inquiry MIL on ECM - 0
15 Вх. Signal VSS Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
16 The gauge of turns of an entrance shaft Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
17 The gauge of turns of an entrance shaft Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
18 It is not used - -
19 The gauge of turns вх. A shaft/turbine Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
20 Вх. Signal TPS The engine is started 0-В + (impulses)
21 DLC - 0
22 Э/м the valve blocking муфты the hydrotransformer Ignition is switched off (OFF) 0
Ignition is included (ON) В+
23 Food TCM - В+
24 Mode "D" Ignition is included (ON), the lever = "D" В+
Ignition is included (ON), the lever ≠ "D" 0
25 Mode "N" Ignition is included (ON), the lever = "N" В+
Ignition is included (ON), the lever ≠ "N" 0
26 Alarm indicator HOLD HOLD вкл 0
HOLD выкл В+
27 It is not used - -
28 It is not used - -
29 It is not used - -
30 It is not used - -
31 It is not used - -
32 Turns of the engine (gauge CKP) Single turns 8 9 (signal)
Ignition is included (ON) <1.0
33 Temperature охл. Zh (gauge ECT) The engine is not heated-up В+
34 Grounding - 0
35 Ignition Ignition is included (ON) В+
Ignition is switched off (OFF) 0

Card of distribution of pressure on plugs of socket TCM (diesel models)

The plug

Appointment

Check conditions

Nome. Value, In

AND The switch of mode HOLD HOLD вкл 0
HOLD выкл В+
IN Verf / Ignition is included (ON) 5
WITH TPS The engine is started 0 - In + (impulses)
D The gauge-switch 4WD LOW 4WD LOW выкл В+
4WD LOW вкл 0
Е Temperature охл. Zh (gauge ECT) The engine is not heated-up В+
F DLC - 0
G The gauge of turns вх. A shaft/turbine Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
I Вх. Signal VSS Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
J Alarm indicator HOLD HOLD вкл 0
HOLD выкл В+
M Switch POWER/ECONO POWER выкл В+
POWER вкл 0
N Alarm indicator POWER POWER вкл 0
POWER выкл В+
Р Mode "L" Ignition is included (ON), the lever = "L" В+
Ignition is included (ON), the lever ≠ "L" 0
Q Mode "N" Ignition is included (ON), the lever = "N" В+
Ignition is included (ON), the lever ≠ "N" 0
R Mode "2" Ignition is included (ON), the lever = "2" В+
Ignition is included (ON), the lever ≠ "2" 0
S The gauge of turns вх. A shaft/turbine Wheels do not rotate 0 or 5
Wheels rotate 0-5 (impulses)
Т The gauge-switch of stoplights The pedal of a foot brake is squeezed out В+
The pedal of a foot brake is released 0
U Э/м the valve blocking муфты the hydrotransformer Ignition is switched off (OFF) 0
Ignition is included (ON) В+
V Grounding - 0
W Э/м the valve-switch In Ignition is switched off (OFF) 0
Ignition is included (ON) В+
Х The battery - В+
Y Э/м the valve-switch And Ignition is switched off (OFF) 0
Ignition is included (ON) В+
Z Ignition Ignition is included (ON) В+
Ignition is switched off (OFF) 0

Identification card of plugs of socket TCM for diesel models

Electromagnetic valves

On an example of petrol models

 PERFORMANCE ORDER

  1. Disconnect electroconducting from TCM and measure resistance between plugs №№ 8, 7 and 22 its contact sockets, - demanded value makes 11 15 Ohm at 20 With.
  2. Submitting on plugs №№ 7, 8 and 22 pressure (+) batteries, on hearing make sure of serviceability of operation of electromagnetic valves (clicks should be distributed in the pallet картера АТ).

The gauge-switch of positions of the lever of the selector (PNP)

Checks

PNP plays a role of gauges-switches of the permission of start and activation of fires of a backing.

 PERFORMANCE ORDER

  1. Make sure of serviceability of activation of a starter in positions Р and N the selector lever, in other positions of the lever starter activation should not be represented possible.
  2. Make sure of serviceability of activation of fires of a backing while translating the lever in position R (ignition should be included).
  3. Disconnect from the gauge-switch electroconducting and check up correctness of distribution проводимостей between plugs of a contact socket in various positions of the selector lever. In case of need make corresponding adjustment.

Distribution card проводимостей between plugs of a socket of gauge-switch PNP

Identification card of plugs of a socket of gauge-switch PNP

Adjustment

 PERFORMANCE ORDER

  1. Release the screw of fastening of the gauge-switch. Translate the selector lever in position N.
  2. Level the gauge-switch according to instructions.
1 — the Base line of neutral position
2 — the Fixing screw
3 — Risk
  1. Tighten a fixing bolt with effort 3.9 6.9 Nanometers.

The gauge of turns of an entrance shaft of the AT/TURBINE of the hydrotransformer

 PERFORMANCE ORDER

  1. Prop up wheels противооткатными boots.
  2. Поддомкратьте one of back corners of the car to a full separation of a corresponding wheel from the earth.
  3. Disconnect electroconducting from the gauge of turns of an entrance shaft of the AT/TURBINE of the hydrotransformer, - the 2-contact socket is located at the left in a back part картера transmissions.
  1. Connect an ohmmeter to contact plugs of a socket of the gauge.
  1. Observe behind reaction of an ohmmeter on torn off from the earth rotation of a driving wheel of the car, - стрелочный the index should fluctuate within a range 0 41 Ohm. The faulty gauge replace.

The gauge-switch of stoplights

 PERFORMANCE ORDER

  1. Disconnect from the foot brake of the gauge-switch fixed under a pedal electroconducting.
  1. By means of an ohmmeter check up correctness of distribution проводимостей between four plugs of the gauge-switch in both positions of the last. Compare results of measurements to the data resulted in the table, - the faulty gauge-switch replace.

Distribution card проводимостей between plugs of a socket of the gauge-switch of stoplights

The gauge-switch of activation of mode HOLD

Disconnect electroconducting from selector AT of gauge-switch HOLD located under the lever.

By means of an ohmmeter check up correctness of presence/absence of conductivity between plugs of a 2-contact socket of the gauge-switch in both positions of the last. In the included position of the gauge-switch conductivity should be absent, in switched off - to take place.

The switch of modes POWER/ECONO

 PERFORMANCE ORDER

  1. Disconnect from the switch electroconducting.
  1. By means of an ohmmeter check up correctness of distribution проводимостей between four plugs of a contact socket of the switch in both positions of the last. Compare results of measurements to the data resulted in the table, - the faulty gauge-switch replace.

Distribution card проводимостей between plugs of a socket of switch POWER/ECONO

The gauge-switch of activation of the light indicator of an all-wheel drive mode (4WD)

 PERFORMANCE ORDER

  1. Disconnect from located at the left above in a back part of a distributing box of the gauge-switch of the indicator 4WD electroconducting.
1 — the Gauge-switch of activation of the light indicator 4WD
2 — the Gauge-switch of lowering transfer (4WD LOW)
3 — VSS
4 — the Distributing box
  1. By means of an ohmmeter check up correctness of presence/absence of conductivity between plugs of a 2-contact socket of the gauge-switch in both positions of the last. In the included position of the gauge-switch conductivity should be absent, in switched off - to take place.

The gauge-switch of activation of a mode of lowering transfer (4WD LOW)

 PERFORMANCE ORDER

  1. Disconnect from located at the left above in a back part of a distributing box of the gauge-switch 4WD LOW electroconducting.
  1. By means of an ohmmeter check up correctness of presence/absence of conductivity between plugs of a 2-contact socket of the gauge-switch in both positions of the last. In the included position of the gauge-switch conductivity should be absent, in switched off - to take place.