KIA Sportazh - Kia Sportage
Controls and operation receptions
Current leaving and service
The engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of the engine/decrease of toxicity of the fulfilled gases and release of the fulfilled gases
Systems of an electric equipment of the engine
   System of ignition of the petrol engine
      The general information, security measures
      Checks of a control system by ignition
      Check of a corner of an advancing of ignition
      Check of coils of ignition
      Check of condition ВВ of electroconducting
      Check of the gauge of a detonation
      Replacement of coils of ignition
      Spark plugs - the general information
      Removal and installation of the gauge of position of a camshaft (CMP)
      Removal and installation of the gauge of position of a cranked shaft (CKP)
      Removal and installation of the gauge of a detonation (KS)
   System of simplification of cold start of the diesel engine
   Charge and start systems
Five-step manual box of a gear change
Automatic transmission
Transmissionnaja line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control кузовные the sizes
Schemes of electric connections
Kia Sportage>> Systems of an electric equipment of the engine>> System of ignition of the petrol engine>> Replacement of coils of ignition

Replacement of coils of ignition

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Remove a service cover (see an illustration) and disconnect ВВ electroconducting.
  3. Disunite contact sockets of electroconducting of bobbin assemblages.
  4. Turn out four fixing bolts and remove ignition coils.
  5. Get replaceable assemblage on the regular place over a spark plug of the second/fourth cylinder and densely press downwards, having provided with that reliable electric contact.
  6. Screw fixing bolts and tighten from with demanded effort (19 ÷ 25 Nanometers).
  7. Connect НВ and ВВ electroconducting, - track reliability of fixing of sockets.

ВВ wires in appropriate way are marked and should not be mixed at connection!

  1. Connect a negative wire to the battery.