Kia Sportage>>
Controls and operation receptions>>
The car equipment, arrangement of devices and controls>>
Controls and the salon equipment
Controls and the salon equipment
Switches and the controls located on a steering column and a steering wheel
Left подрулевой the switch
Left подрулевой the switch is intended for switching of modes of functioning of external lighting devices, activation of illumination of devices, the alarm system by a headlight and managements of functioning of indexes of turns.
The choice of modes of functioning of external lighting devices and activation of illumination of devices is carried out by means of the rotary handle on the end of the lever of the switch. The handle has three fixed positions:
OFF — External lighting devices and illumination of the panel of devices are switched off.
— Running fires in a mode of dimensions (dimensional fires, plus licence plate illumination) and illumination of devices are activated.
— Running fires in a mode near/distant (depending on position of the lever of the switch) light (dimensional fires, a passing light/headlight, plus licence plate illumination) and illumination of devices are activated.
For headlight activation it is necessary to wring out the lever of the switch from itself before click, - on a combination of devices the corresponding light indicator (the Section the Combination of devices, measuring instruments, control lamps and light indicators see) should light up.
The alarm system is made by a headlight of headlights by lever procrastination on itself and can be made in any position of the trailer rotary handle, - at отпускании the lever automatically comes back in a starting position.
Activation of corresponding indexes of turns is made by отжимания the lever before click upwards or downwards in a steering wheel plane, - serviceability of activation proves to be true operation in a flashing mode corresponding of two devices of green light indicators built in a combination (the Section the Combination of devices, measuring instruments, control lamps and light indicators see). Switching-off of indexes (with выщелкиванием the lever in neutral position) is made automatically at return of a steering wheel to rectilinear position, and in case of need can be продублировано by compulsory отжимания the switch. There is also a possibility of short-term activation of indexes by a lung (without overcoming of a point of resistance) отжимания the switch in a corresponding direction that is rather convenient, for example, at evolution in the next number on a multistrip marking, - at отпускании the lever it automatically comes back in initial (neutral) position.
Right подрулевой the switch
|
|
In order to avoid damage приводного the mechanism it is not necessary to include screen wipers, at a dry surface of glass, it is not necessary to move also brushes hands. Do not suppose hit on rubber working elements of screen wipers of gasoline and other solvents. For the purpose of prevention of risk of failure of the pump of a washing liquid try not to activate it at the empty tank. |
|
|
Right подрулевой the switch is intended for management of functioning of cleaners and windscreen washers. |
Start of screen wipers is possible only at the included ignition. Moving of the lever of the switch upwards and downwards in a steering wheel plane allows to choose modes of functioning of screen wipers:
OFF — In the given (top) position of the switch screen wipers are switched off.
INT — the position of the switch Second from above corresponds to an interval mode of functioning of screen wipers.
1 — In the third from above position of the switch screen wipers pass in a constant mode of functioning with a normal rate of waves.
2 — the Bottom position of the switch serves for start of screen wipers in a high-speed mode.
Adjustment of duration of pauses at work of screen wipers in an interval mode is made by means of the ring switch planted on an average part of the handle of the lever switch: position S corresponds to the maximum duration of pauses, F - minimum.
Unitary operation of screen wipers can be made a way отжимания the lever switch from itself.
|
|
The given function is activated only in position OFF of the switch. At lever deduction in the wrung out position screen wipers will work in a continuous mode. |
For giving on glass of a washing liquid it is necessary to delay the switch lever on itself. Thus, if the switch is in position OFF, simultaneously with liquid giving the screen wipers which functioning will stop after 2 more - 3 waves after отпускания the lever will be activated.
|
|
The description of principles of management is resulted by functioning of a cleaner and a washer of back glass more low in subsection Controls and operation receptions. |
Controls functioning темпостата
|
|
Use темпостата at intense movement (for example, in a city), on slippery and twisting roads, and also in other road situations interfaced to necessity of frequent change of a high-speed mode, can lead to control loss over driving! |
|
|
In order to avoid casual start темпостата do not forget to make its deactivation from the main switch! |
Темпостат it is intended for maintenance of constant cruiser speed of movement of the car (after dispersal of the last till the speed not below 40 km/h) without necessity of foot keeping on a gas pedal.
Controls functioning темпостата settle down on the right on a steering wheel, and also under a combination of devices, to the right of a steering column.
|
|
The main switch темпостата. |
|
|
Buttons of management of functioning темпостата, located on a steering wheel. |
For activation темпостата press on located on the panel of devices to the right of a steering wheel the button of the main switch of system. Disperse the car till demanded speed (not less than 40 km/h) and press button SET/CST which is located in an average part of the panel of operating switches темпостата on the right on a steering wheel. Release the button and simultaneously clean a foot from a gas pedal, - the chosen cruiser speed of movement will be automatically supported, - in the left section of a combination of devices the corresponding control lamp (the Section the Combination of devices, measuring instruments, control lamps and light indicators see) should be activated.
|
|
The choice and installation of cruiser speed of movement cannot be made earlier, than after 2 seconds from the moment of pressing the main switch темпостата. At car movement uphill and under a bias actual speed of movement can deviate the chosen cruiser value a little. |
Deactivation of function of maintenance of the chosen cruiser speed can be made one of next ways:
Press a brake pedal;
Squeeze out a coupling pedal (models with Manual transmission) / translate selector AT lever in position N (on model with АТ);
Press button CANCEL, in the bottom part of the panel of operating switches on the right on a steering wheel.
For return to chosen earlier cruiser high-speed mode press the top button of the panel of operating switches (RES/ACC) on a steering wheel.
|
|
The call from memory of system of the value of cruiser speed brought in it can be carried out only provided that at deactivation of function of maintenance of a high-speed mode speed of movement of the car not opuskalas/rose more than on 15 km/h above/more low the kept value, otherwise choice and installation procedure should be repeated. Dump of the kept value occurs also at delay of the car till the speed below limiting for activation темпостата (40 km/h). |
Change of value of the chosen cruiser speed of movement can be made by keeping in the pressed position buttons RES/ACC (acceleration) or SET/COAST (delay).
|
|
Short pressing the same buttons allow to correct the chosen cruiser high-speed mode with step to 1.6 km/h. The chosen new cruiser speed is brought in memory of system, replacing with itself the previous value. |
Time acceleration or car delay at activated темпостате can be made by means of gas and brake pedals accordingly, - last current value of cruiser speed remains kept in memory of system and will be caused at return to an active mode, the remark concerning restrictions on preservation in memory темпостата the chosen value of cruiser speed of movement see above.
Full deactivation темпостата (with memory clearing) is made by means of the main switch, - the control lamp on a combination of devices should go out, - or by ignition deenergizing.
The horn switch
The button of inclusion of a horn is built in in hub a steering wheel part, - for activation of a sound signal press on one or the other images of a small horn on the parties from logo KIA on a steering wheel.
Adjustment of an inclination of a steering column
The steering column should be adjusted so that the steering wheel nave was opposite to a thorax of the driver. Position at which the steering wheel nave is opposite to the person of the driver, is wrong as reduces protective functions of the pillow of safety built in in it.
|
|
It is not necessary to regulate an inclination of a steering column during movement! |
|
|
For change of an angle of slope of a steering column delay upwards the lever of a clamp located from below, adjust position of a steering column and fix it, having released the lever. For check of reliability of fixing of a column pull upwards-downwards a steering wheel. |
The switch of ignition/lock of blocking of a steering wheel
The switch of ignition/lock of blocking of a steering column is located on the right on a steering column and can be in one of the following four fixed positions:
LOCK — the Ignition key can be entered into the lock or is taken from it only in the given position. At поворачивании the ignition key from position LOCK in position ACC there is a removal of blocking of a steering column. To turn a key from position ACC in position LOCK it is necessary to press slightly preliminary it, a few having drowned in the lock, on models with АТ it is necessary to translate preliminary also the selector lever in position Р.
|
|
On models with Manual transmission do not forget before an exit from the car to include the first transfer and to cock a lay brake! |
Blocking of a steering column is carried out automatically at attempt to turn a steering wheel after extraction of a key from the ignition lock.
|
|
Blocking of a steering column sometimes results impossibility to turn a key in the ignition lock. In such situation it is necessary to pull slightly a steering wheel for the purpose of loading removal, simultaneously turning a key in the lock. |
|
|
Steering wheel blocking at all should not be considered as alternative of raising of a lay brake! At all do not take a key from the lock of ignition during movement, is will inevitably lead to blocking of a steering column and control loss over management! |
ACC — In the given position of the ignition key possibility of functioning of auxiliary consumers of the electric power (an audiosystem, прикуриватель, the heater fan, screen wipers etc.) is provided.
ON — the ignition key is In the given position constantly during car movement, and also at engine work on single turns. An electric food of all systems and the additional equipment established on the car is simultaneously provided. At turn of a key from position ACC position ON quickly joins some of the devices of control lamps built in in a combination (the Section the Combination of devices, measuring instruments, control lamps and light indicators see). On models of a corresponding complete set поворачивание a key in position ON leads to automatic activation of running fires of light time of days (DRL).
|
|
Do not leave the ignition key in position ON at the switched off engine since thus there is a fast discharge of the battery. |
START — In the given position of the lock there is a starter activation. After realisation of start of the engine the key should be released, - it should return to position ON automatically. If the car is equipped by system иммобилизации engine start will be blocked if the anticreeping system does not identify a key code.
|
|
For elimination of excessive resistance поворачиванию a key in position START if such situation arises, pull a steering wheel to the right-to the left. |
The controls located in the left part of the panel of devices
Two groups of switches located on the right and to the left of a steering column are located on models of a standard complete set in the left part of the panel of devices.
Into Right-wing group structure enter the main switch темпостата, the switch of management of functioning of a back screen wiper/giving of a liquid of washing of back glass, and also (on models of a corresponding complete set) the switch of activation/deactivation of a sports mode (POWER) АТ.
To the left of a column are located shtyrkovo-rotornyj the switch of adjustment of position of door rear-view mirrors, and also a regulator of intensity of illumination of devices.
Appointment of the main switch темпостата is explained above.
Instructions for use by a regulator of intensity of illumination of devices it is resulted in the beginning the Combination of devices, measuring instruments, control lamps and light indicators (the Combination of devices (petrol models) see an illustration) Has undressed.
|
|
For start of a cleaner of back glass press the bottom section of the corresponding switch of a Right-wing group, - the top section of the same switch serves for giving activation on glass of a washing liquid. |
|
|
The liquid moves on glass until the switch button is kept by the pressed. |
|
|
Activation of a sports mode (POWER) АТ on models of a corresponding complete set is represented possible only in positions D, 2 or L the selector lever, and in last two cases no changes are brought in the gear change scheme. By pressing the corresponding button of a Right-wing group of switches in the left sector of a combination of devices control lamp POWER (the Section the Combination of devices, measuring instruments, control lamps and light indicators see) is activated. At activation of a sports mode (the control lamp burns, selector AT lever is in position D) switching of transmission towards increase of transfers is made with a delay, i.e. at higher turns of the engine. Mode activation kickdown in a sports mode (at overtaking or movement uphill) demands smaller effort of pressing to a gas pedal, than in a mode of normal functioning (ЕСО) АТ. |
|
|
The switch of adjustment of position of door rear-view mirrors has shtyrkovo-rotornuju a design. The choice of a mirror subject to adjustment (R/L) is carried out by means of штырькового the switch which has been built in in the central part роторного of a regulator of management by functioning of electric drives of mirrors. For updating of position of the chosen mirror press on marked with arrows of a corresponding direction, sector operating 4-item роторного a regulator. |
|
|
At regulator deduction in the pressed position the mirror ceases to move on reaching it of extreme position, however приводной the electromotor continues to rotate thus, - in order to avoid damage of the electromotor as a result of overloads it is not necessary to keep a regulator pressed longer, than it is necessary for end of demanded updating. |
Controls and the salon equipment on the central console
On the central console of the car there is the greatest number of controls and the salon equipment.
It is possible to carry switches and the regulators located on forward section of the console, and also the lever of raising of a lay brake, the gear change lever to controls (to model with Manual transmission) / the lever of the selector of modes АТ (models with АТ), and also the lever of switching of modes of a distributing box. The description only switches and the regulators located on a forward part of the console is more low resulted. Appointment and the description of levers is resulted in the Part Receptions of operation and auxiliary systems.
Number of elements of the equipment of salon concern a ware box, чашкодержатели, hours, ashtrays and прикуриватель.
The ware boxes which have been built in a curbstone of the central console
|
|
On some models the central console is equipped by a ware box without a cover. The description led more low to such models does not concern. |
In assemblage of a console curbstone of the central console it is equipped two ware boxes. One box is located in a curbstone under the folding cover, the second - sliding - is built in directly to a cover.
|
|
For access to the first ware box, pull the lamellar lever under a cover from its forward party and cast away last upwards. |
|
|
The second, smaller volume, the box is put forward by displacement back back section of the top half of cover of the first box. |
|
|
It is necessary to notice that the volume cover of a console ware box can play also an armrest role, - having pressed the button located sideways, release a clamp and shift a cover forward. |
Чашкодержатели
|
|
It is not necessary to use чашкодержателями during movement! |
|
|
Forward чашкодержатель it is built in in the top part of console section of the panel of devices, it is direct under assemblage дефлекторов the central air line. Shortly press the obverse panel чашкодержателя, - after отпускания the panel should be put forward slowly from the console. To clean чашкодержатель, accurately wring out it in the console before the click confirming operation of a clamp. |
|
|
Back чашкодержатель it is built in in a back wall of a curbstone of the central console, it is direct over a back ashtray, - pull for the handle on the panel and put forward чашкодержатель from the console. It is cleaned back чашкодержатель similarly forward. |
Прикуриватель
|
|
Прикуриватель it is built in in the bottom part of forward section of the central console to the right of a forward ashtray and functions only at the included ignition (a key in position ON or АСС). |
For activation прикуривателя simply drown its button in a reception nest against the stop, - after a warming up of a heating element the button will automatically jump out in a starting position.
|
|
At all do not keep the button прикуривателя in the pressed position by force! If the button прикуривателя after pressing does not return to a starting position after more than 30 seconds, it is necessary to liberate it from a nest manually, having hooked the suitable tool. After use do not forget to return the button in a nest in order to avoid a contamination of the last. The reception nest прикуривателя can be used for connection of external consumers of the electric power (the pump, зарядное the device for a radio telephone, a vacuum cleaner), calculated on a food in 12 In and with capacity of consumption no more than 120 Vt. |
Ashtrays
|
|
The forward ashtray is located to the left of прикуривателя, back is built in in a back wall of a curbstone of the central console directly under back чашкодержателем. |
|
|
For using an ashtray extend it from a reception niche for the facing panel. Press fixing spring and definitively extend an ashtray from the console.
For extraction пеплоприемника for the purpose of its clearing extend an ashtray from a niche against the stop, then wring out a lock uvula and take пеплоприемник.
|
|
The alarm system switch
|
|
Alarm system inclusion is made by means of the push-button switch which has been built in in console section of the panel of devices of the car directly over the control panel by functioning of systems of heating and ventilation of salon, and usually equipped with the built in light indicator with the pictogramme representing two triangles entered each other. |
Alarm system activation can be made in any position of the lock of ignition and leads to simultaneous operation of all four indexes of turns (and their light indicators in a combination of devices). The alarm system is intended for the prevention of participants of traffic of the compelled stop of the car, and also should be used in other provided ПДД situations.
For alarm system switching-off press the button repeatedly, - the built in light indicator долежн to go out.
The switch of heating of back glass
Electroheating inclusion allows to remove from a surface of back glass of a condensate, hoarfrost, and even thin наледи. The button of inclusion of electroheating is located on console section of the panel of devices, to the right of the button of inclusion of the alarm system. At heating activation the light indicator (the Section the Combination of devices, measuring instruments, control lamps and light indicators see) lights up built in a combination of devices.
Heating switching-off is made by repeated pressing the button, or automatically, later an order of 15 minutes after activation on a signal of the special timer, - the light indicator should go out.
|
|
Functioning of a heating element becomes possible only in position ON of the switch of ignition, - while translating a key in position АСС or LOCK heating is disconnected. |
Do not forget to check before a start of motion quality of the review through back glass of the car.
The threadlike grid of a heating element of a heater is pasted on an internal surface of back glass and demands care in circulation, - try not to damage a grid at glass wiping. Wiping should be made only along heater threads.
The switch of the conditioner of air
Switch K/V also is a part of group of console switches, is located to the right of the switch of heating of back glass, is designated by the pictogramme with the image of a snowflake and equipped by the built in light indicator. The description of principles of functioning of system K/V is resulted regarding the Device of maintenance of comfort.
The switch of a mode of air circulation
The switch of a mode of air circulation is last of switches of console group, is located in its right part, to the left of hours and is designated by the pictogramme. The description of principles of functioning of system of ventilation of salon is resulted regarding the Device of maintenance of comfort.
Hours
|
|
Hours are not established, if the car is equipped with an audiosystem, in this case hours are built in an audiosystem. |
The digital chronometre is located in the right top corner of console section of the panel of devices. In positions ON and ACC the lock of ignition of the button, the chronometre indication can be modified by means of built in the right part of the display of buttons:
H — The Button of updating of indications of hours (scrolling forward).
M — The Button of updating of indications of minutes (scrolling forward).
:00 — the Button of zeroing of indications of minutes (with a rounding off in the corresponding party depending on the current indication of minutes: N: [00 29] N:00; N: [30 59] [N+1]:00)
Elements of the equipment of the salon, located on the ceiling panel/windscreen
Sun-protection peaks
Sun-protection peaks provide protection of eyes of the driver / the forward passenger from blinding by direct solar beams. Peaks are fixed on arms of the rotary design allowing in case of need to develop their in parallel lateral glasses of the car (preliminary liberate an arm from a clamp).
|
|
From the back party of a driver's peak the pocket for storage of documents is provided, in a passenger sun-protection peak (also from the back party) is built in equipped сдвижной шторкой макияжное a pocket mirror. Opening of a cover of a pocket mirror at the included ignition (a key in position ON or АСС) leads to activation of illumination of a pocket mirror. |
Internal rear-view mirror
Before a trip it is necessary to adjust an internal rear-view mirror, turning it so that in its centre the centre of a window of a door of a back was visible. Thus the mirror should be in a day mode.
|
|
For switching between night and day modes move the lever located behind a mirror, accordingly to itself or from itself. At inclusion of a night mode brightness of light of headlights of cars, moving behind, will be less, than in a day mode, however at the same time image sharpness decreases also. |
Main салонный the fixture
|
|
The salonnyj fixture is built in in the central part of a ceiling upholstery and equipped by three push-button switches, allowing to choose a mode of its functioning. |
OFF — the Fixture is switched constantly off.
DOOR — the Fixture is activated at opening of doors.
ON — the Fixture is constantly included.
Back салонный the fixture
The back fixture is established on models the Versatile person and serves for luggage space illumination. The on-off switch of a choice of a mode of its functioning is built in the fixture case:
OFF — the Fixture is switched constantly off.
ON — the Fixture is activated at opening of a door of a back.
Switches of management of electric drive functioning стеклоподъемников
|
|
For the purpose of prevention of failure of the electric drive / its protective safety lock it is not necessary to carry out a drive more than two glasses simultaneously! |
The electric drive enters into a standard complete set of all models considered in the present Management стеклоподъемников.
Functioning стеклоподъемников becomes possible only at the included ignition.
On an armrest of each of car doors the individual switch intended for management by functioning of the electric drive стеклоподъемника to the given door is located. The drive (lowering/podnimanie) of glass is carried out by pressing/procrastination of the keyboard switch.
|
|
The main panel of switches of management is located on an armrest of a driver's door with functioning by the electric drive стеклоподъемников all doors of the car. The principle of using switches is similar described above for individual door switches. Besides four/two (depending on quantity of doors) operating switches into structure of the main panel enters the keyboard switch, allowing to carry out drive blocking стеклоподъемников passenger doors from individual switches, - for blocking activation press the left part of a key. |
Ware boxes, pockets, монетница
|
|
The main ware box is equipped in the right part of the panel of devices, - for opening pull on itself the handle of the lock of a box. |
Besides the main ware box and the boxes equipped in a curbstone of the central console, the car salon is equipped by door pockets and a niche in the panel of devices intended for storage of small subjects, a tray in a forward part of horizontal section of the central console (it is direct under a forward ashtray) and three-section монетницей, located under left lateral дефлектором panels of devices to the left of a regulator of intensity of illumination of devices (see an illustration the Combination of devices (petrol models)).